Macc Special 335 CSO

£5,714.29

Model: Special 335 CSO

TECHNICAL DATA
•Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.
•Vertical rotation on bolt with adjustable tapered bearings without backlash.
•High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm screw
•Appropriately dimensioned flywheels.
•Strong band guides with tight stress-raiser bearings and adjustable widia tips.
•Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
•Vice with a device for quick approach
•Wide rotating material support table
•Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
•Cutting thickness 1,2 mm
•Cutting range 45° left – 60° right
•Adjustable stop for cuts of the same size
•24 V low tension plant
•0,06 kW power-driven pump for band cooling

 

 

Add to Wishlist

Description

Model: Special 335 CSO

TECHNICAL DATA
•Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.
•Vertical rotation on bolt with adjustable tapered bearings without backlash.
•High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm screw
•Appropriately dimensioned flywheels.
•Strong band guides with tight stress-raiser bearings and adjustable widia tips.
•Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
•Vice with a device for quick approach
•Wide rotating material support table
•Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
•Cutting thickness 1,2 mm
•Cutting range 45° left – 60° right
•Adjustable stop for cuts of the same size
•24 V low tension plant
•0,06 kW power-driven pump for band cooling

The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

OPTIONAL EQUIPMENT
•Pneumatic installation for vice
•SINGLE-PHASE motor 75 m/1′
•Speed variator for 20-90 m/1′

Brand

Macc