SPECIAL 285 M/S
•Bandsaw machine with manual and semiautomatic functioning.
•Vertical rotation on bolt with adjustable tapered bearings without backlash.
•High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
•Appropriately dimensioned flywheels
•Strong band guides with tight stress-raiser bearings and adjustable widia tips.
•Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
•Vice vith a device for swift locking by excentric means
•Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
•Cutting thickness 1,2 mm
•Cutting range 0° - 60° right
•Adjustable stop for cuts of the same size
•0,06 kW power-driven pump for band cooling
•Manual Mode functioning
1. manual vice clamp
2. by pressing the button on the head lever handle, the machine starts the manual mode
3. manual cutting operation
4. either manual bow up positioning or bow returning in the up setted position by pressing twice the Start button
5. manual vice opening
•Semiautomatic mode functioning:
press the Start button to begin the cuttin cycle.
1. the vice starts and the band motor starts
2. bow descents for the cutting operation
3. bow goes back to the start position
4. band motor stops
5. the vice opens
The basic characteristics of the machine, such as rigidity of the blade support,
flywheel dimensioning, band guides, and band stretching, have been
thoroughly studied to avoid yielding of the band, increase its durability, and
improve linearity and time of cutting.
•SINGLE-PHASE motor 64 m/1'
For more information, please visit this product's webpage.